DIRECTIONS

For spectacular Reiziger results.
Feed it right.

Use Reiziger Bloom Food A&B for the blooming stages of the plant. Abundant in potassium, chelated micronutrients and an exclusive patented phosphorus that produce consistent, powerful plants, it promises to help add mass and bulk to your blooms by harvest time.

 

BUD FORMATION

Get them off to a head start.

 

BUD FORMATION

Get them off to a head start.

Start irrigating with an EC of 1.2 – 1.7 mS/cm higher than the EC of the tap water. Do this by filling the nutrition tank with water. Shake Bloom Food well. Add A&B concentrates in equal amounts at the rate of 2 – 3 ml/L/qt. Irrigate until drainage appears. To build the leaf and root mass required for heavier yields add Reiziger Root Booster to the nutrition tank at the rate of 0.5 ml/L/qt. To ensure a stronger, more robust plant add Reiziger Grow Booster at the rate of 2.5 ml/L/qt. To boost fruit and flower yield add Reiziger Bud Booster at the rate of 1 ml/L/qt.

The suggested EC levels are based on tap water of 0.0 mS/cm. If your tap water EC is higher than 0.0 mS then your recommended EC will also be higher. E.g.: Suggested EC is 1.5 mS and your water is EC 0.5 mS then your EC will be 1.5 (EC suggested) + 0.5 (EC of tap water) = EC 2.0 mS/cm.

SMALL BUD DEVELOPMENT

Strong and healthy budding.

 

SMALL BUD DEVELOPMENT

Strong and healthy budding.

Start irrigating with an EC of 1.3 – 1.8 mS/cm higher than the EC of the tap water. Do this by filling the nutrition tank with water. Shake Bloom Food well. Add A&B concentrates in equal amounts at the rate of 2.5 – 3.5 ml/L/qt. Irrigate until drainage appears. To build the leaf and root mass required for heavier yields add Reiziger Root Booster to the nutrition tank at the rate of 0.5 ml/L/qt. To ensure a stronger, more robust plant add Reiziger Grow Booster at the rate of 2.5 ml/L/qt.

The suggested EC levels are based on tap water of 0.0 mS/cm. If your tap water EC is higher than 0.0 mS then your recommended EC will also be higher. E.g.: Suggested EC is 1.5 mS and your water is EC 0.5 mS then your EC will be 1.5 (EC suggested) + 0.5 (EC of tap water) = EC 2.0 mS/cm.

BUDS INCREASE IN SIZE

Boost fruit and flower yield.

 

BUDS INCREASE IN SIZE

Boost fruit and flower yield.

Start irrigating with an EC of 1.0 – 1.5 mS/cm higher than the EC of the tap water. Do this by filling the nutrition tank with water. Shake Bloom Food well. Add A&B concentrates in equal amounts at the rate of 2 – 3 ml/L/qt. Irrigate until drainage appears. To build the leaf and root mass required for heavier yields add Reiziger Root Booster to the nutrition tank at the rate of 0.5 ml/L/qt. To ensure a stronger, more robust plant add Reiziger Grow Booster at the rate of 2.5 ml/L/qt.

The suggested EC levels are based on tap water of 0.0 mS/cm. If your tap water EC is higher than 0.0 mS then your recommended EC will also be higher. E.g.: Suggested EC is 1.5 mS and your water is EC 0.5 mS then your EC will be 1.5 (EC suggested) + 0.5 (EC of tap water) = EC 2.0 mS/cm.

BUDS PEAK AND RIPEN

Enhance the ripening process.

 

BUDS PEAK AND RIPEN

Enhance the ripening process.

During the final 1 – 2 weeks when fruit and flower blooms peak in size and ripening, irrigate with tap water with an EC of 0.0 mS/cm and Reiziger Grow Booster at the rate of 2.5 ml/L/qt. For exceptional natural flavour and aroma, add Reiziger Bud Booster at the rate of 1 ml/L/qt. pH adjustment is not critical in this stage.

The suggested EC levels are based on tap water of 0.0 mS/cm. If your tap water EC is higher than 0.0 mS then your recommended EC will also be higher. E.g.: Suggested EC is 1.5 mS and your water is EC 0.5 mS then your EC will be 1.5 (EC suggested) + 0.5 (EC of tap water) = EC 2.0 mS/cm.

Recommendations. Made simple.

Take control of your nutrients. Experimentation has its place, however if you are just starting out, resist the temptation. If you are serious about hydroponics and really do want to enjoy twice the yield of soil growers, you should purchase the necessary nutrient testing meters. This one simple step ahead in the art of growing will assure better results in every size and type of hydroponic system. In the long run, it’s how you manage your solution and the system that will determine success of failure.

 
 

pH range. Recommended pH is 5.2 – 5.8.

Maximum dosage. Never exceed a ratio of 1:250 (4 ml/L)

EC. Never use an EC higher than 2.8 mS/cm.

 

Values. Always measure pH and EC levels with suitable equipment.

Mixing. Never mix A & B together in undiluted form.

Dosage. Never use more than directed.

Entirely new, yet immediately familiar

The innovative dosing system is the first closed liquid dosing system in the world and enables the user to dose a specific amount of liquid in only three steps. No longer is it necessary to orientate the packaging or squeeze the reservoir. Overdosing or over pouring are now a thing of the past.

DOSING SOLUTIONS

Turn the bottle
upside down.

To dose a specific amount of liquid start by turning the bottle completely upside down to fill the dosing chamber.

 

Tilt the bottle for the required dosage.

For 40 ml, follow the line to the left of the dosing chamber and tilt bottle. Likewise for 20 ml, follow the line to the left of the dosing chamber and tilt bottle.

 

Unscrew the cap.

Unscrew and remove the cap. This closes the valve between the dosing chamber and the bottle.

 

Pour out the liquid.

Your product is now dosed and ready to use.

For big, productive Reiziger Results.
Water it right.

The frequency of feeding depends on the grow room temperature, evaporation and the water supply in the medium. Establishing a balance between the water holding capacity of a medium, aeration and drainage is a key to optimum plant growth. Generally, we recommend giving five-litres/ m²/ day for fully-grown plants.

Rockwool.

A general rule for Rockwool slabs in trays is that three daily one minute feeds (50ml) should be sufficient during the first week; then six to ten (50 – 100ml) feeds per day – starting several minutes before the lamps have been turned on and two hours before they are switched off. Rockwool substrates hold liquid while still draining well, however it is still possible to over water. For optimum results regularly check the moisture content of the medium and ensure it is not water logged. Only water the plants during the day period.

Perlite.

The amount of irrigation water to apply is perhaps more important than how and when to irrigate. A general rule of thumb to follow in irrigating greenhouse crops is to apply 10 – 15% more water than the container will hold. Only water the plants during the day period.

Coconut coir pith.

A general rule is that one daily feed should be sufficient during the first few weeks; then two feeds per day – two hours after turning the lamps on and two hours before switching them off. Do not water the plants too often or give too much water. By reducing the watering frequency, optimal water replenishment is established. This improves the capacity of the coconut substrate to absorb all the nutrients, optimises the drainage and air in the medium and prevents accumulation of salts within the coconut substrate. If the EC of the irrigation water is higher than 0.6 mS/cm, then it is better to increase the water dosage until drainage of 20% has been reached (1/5 of the irrigation solution has to leave the medium again). If the EC of the irrigation water is lower than 0.6 mS/cm, a lower drainage of 10% will suffice. Reiziger Coconut Coir Pith holds liquid while still draining well, however it is still possible to over water. When growing in cocoponics, determining pH and EC from drainage water is not a true indication of the coconut substrates value. For optimal results, you are encouraged to use the 1: 1.5 extraction methods.

Expanded Clay.

A general rule of thumb to follow in irrigating greenhouse crops is to apply 10 – 15% more water than the container will hold. Frequency of application will depend upon plant size and greenhouse temperature, but will vary from one 15 minute feed every hour while the lights are on during the first weeks of growth; then one 15 minute feed every two hours – starting several minutes before the lamps have been turned on. Only water the plants during the day period.

Recirculating systems.

Compared with cultivating on substrates with high nutrient and water buffers, such as coconut coir substrates, recirculating systems require closer monitoring of the feed and the plants because they contain insufficient nutrient buffer which means changes to the nutrient solution have a direct and sudden impact on the plant. The feed reservoir must contain at least 5L per plant. The more feed there is available for the plants, the smaller any fluctuations in the pH and EC will be. Under normal circumstances renew feed every 7 – 14 days. If not renewed in time the desired balance between the different nutritional elements will be severely disrupted. Between changes, the feed reservoir needs to be regularly topped up to its original level when 25 – 50% of the feeding solution has been used. It’s best to use a solution that is approximately half as strong as the original feed solution. In circumstances where evaporation is a concern, the reservoir is best topped up with tap water e.g. high temperatures and low humidity. This way evaporation can take place easily while the nutrient solution’s EC is prevented from rising.

 

For the discerning craftsman.

Reiziger is designed without compromise to enhance the cultivation of all fast growing crop strains. Formulated from the original recipes used at the legendary Seed Bank of Holland in the 1980s, Reiziger has the heritage to deliver exceptional quality yields. Free of contaminants and derived from pure nutritive ingredients, it provides your plants with precisely what they crave with no mixing, no measuring and no mess. It’s only natural that the most discerning craftsman might want to opt for the same consistent harvest achieved by Dutch breeders and growers for almost three decades.

ROOT BOOSTER

Boost early white root growth.

Reiziger Root Booster, a Norwegian sea kelp mineral rich tonic helps activate newly potted plants or transplants and boosts early white root growth, promoting uniformity and survivability. Use it to activate, revive and boost root growth for strong plants and faster blooms.

Learn more about Reiziger Root Booster >

GROW BOOSTER

Maximise your yields.

Reiziger Grow Booster energises plants for vigorous growth, hearty roots and abundant yields. Born from nature, made in Holland, this precious and effective liquid has the power to transform plants. In a short time plant vigour improves, lushness is restored and greater yields achieved.

Learn more about Reiziger Grow Booster >

BUD BOOSTER

For crystal laden blooms.

Reiziger Bud Booster was developed in Holland over 20 years ago for commercial growers seeking compact, uniform plants that flower fast and deliver increased weight, flavour and aroma. Reiziger has everything you need for improved quality and yield.

Learn more about Reiziger Bud Booster >
 

For big, fruitful Reiziger Results. Plant it right.

Reiziger hydroponic potting mixes are specifically formulated as a superior base to meet the needs of fast growing annual plant strains grown in containers or beds. They provide the ideal moisture and nutrient environment for healthier, bigger plants. Also use them to improve the soil in most gardens.

Buy online

Buy your Reiziger products
online and we’ll deliver it
to your door.

Buy Bloom Food A&B >

Get help growing

Have a question? Talk to one of
our friendly craftsman to
access their knowledge.

Call 1800 – Reiziger >

Visit a store

Find your nearest retailer
to purchase Reiziger.

Find a store >
DISCLOSURESCLOSE X
WordPress Video Lightbox